In traditional home decoration, few people care about the choice of curtain track
, which is usually purchased with curtains.
Due to your negligence, some curtain shops will choose a cheap track.
In this way, the curtains hang up and there seems to be no problem in a short time;
However, over time, problems such as aging, peeling off the surface, loud noise, slow pulley and card death have all arisen, and some even have fallen to the front of people due to insufficient bearing capacity. The editor will introduce you to how to install the curtain track.
When you buy curtains, you usually pay great attention to the choice of curtain fabric and color.
However, accessories are not well understood and lack attention.
In fact, the curtain fabric is indeed tangible and can add luster to the space.
Accessories are like an aluminum foil. In fact, curtain accessories are also very important. Just like curtain tracks, bad tracks will not be convenient to use curtains in the future.
First, the accuracy of positioning line positioning is related to the success or failure of curtain installation.
First, measure the fixed hole spacing and the size of the required mounting guide rail.
Second, install the curtain guide rail 1. The curtain track has a separate, double track or three tracks.
When the window is wider than 1200, the curtain guide rail should be disconnected, the bending at the fracture should be staggered, the bending should be smooth, and the overlapping length should not be less than 200. Ming curtain boxes generally have the first one. Use machine screws to add thick curtain rail
s and rods; The dark curtain box should be the rear track.
The weight of the small corner of the curtain track shall be encrypted, and the size of the wooden screw shall not be less than 30mm.
2. Install the lifting clip, rotate the clip 90 degrees to the track, and then use the self-tapping screw to install the lifting clip to the top plate.
If it is a concrete structure, expansion wire needs to be added.
Three, install the curtain rod 1, correct the connecting fixture, connecting rod or wire, and pull it to the fixture. Do the plane, consistent with the height of the room. 2. Install the standard curtain track (Double track)
The width of the base should generally be more than 15 CM, and the monorail can be reduced according to the situation.
Four, adjust the position when installing the guide rail, should allow the floor curtain or curtain hanging on the table to release the width of the window sill, in order to prevent the curtain from sagging obstacles and look unsightly.
Five, pay attention to the actual wall requirements are not hollow, otherwise the veneer is easy to crack when drilling.
Wenzhou Pacific Light Industry Co., Ltd. has a great reputation on producing innovative products as the WHY US.
Hard work and performance is rewarded through bonuses and commissions. Job satisfaction is very important for employees and owners, Wenzhou Pacific Light Industry Co., Ltd. will create a work environment that is enjoyable and profitable for all.
WHY US has its grasp on oversees market also and has a very good repute.
comes in a vast array of styles and curtain rods manufacturer depending on which curtain rod setis used.