The manufacturer of window curtain rods,metal curtain rods/poles, decorative curtain rod finials, brackets, cafe curtain rods,curtain track and decorative ware accessories

What are the steps to install the curtain rail?

by:Pacific     2020-03-05
1. Draw the line positioning, taking into account the robustness, to avoid the excessive spacing of the firmware can not withstand the tension, so first measure the size of the required installation track, and then calculate the fixed hole distance, generally, the distance between the fixed parts is not more than 50 cm, and then the line is positioned. The success or failure of the curtain track installation is the accuracy of the positioning. 2. Install the firmware. Generally, the fixing parts are roofs or cement walls that need to be added with expansion wires. 3. When wearing pulleys, when the window width is greater than 1200mm, the curtain rails and rods shall be broken, the broken parts shall be staggered, the bending shall be a gentle curve, and the overlapping length shall be greater than 200mm. The number of pulleys should be related to the length of the track. Usually, 7 pulleys are installed on a 1 m long track to ensure uniform force of curtains after installation. 4. After installing the slide rail, in order to prevent the pulley from rolling out of the track and to prevent the sharp corners at both ends of the guide rail from scratching the front, it must be sealed at both ends of the window. Guide rail, then use screws to seal the seal. 5. Connect the card slot and track of the firmware, insert the curtain track of the pulley into the slot of the firmware, and then place the lifting clip to make the lifting clip of the rail and the firmware at 90 degrees. Tighten the lifting clamp with screws so that the lifting clamp tightly clamps the curtain track. At this time, almost the curtain guide rail is installed. 6, there is a track that can be bent, because some windows are angular, so it is best to use a curved track, the installation method is basically the same as the previous one, but use a few brackets in the middle, especially for thicker fabric curtains to prevent falling off. In winter, curved curtain tracks should be carefully folded to avoid cracking. 7. If it is a Roman Rod, first fix the bracket on the top or window, put the curtain ring up, put the curtain rod directly, press it hard, and press the sound when you hear the card. Go in and install it.
These WHY US curtain rods manufacturer are meant to serve as a guide for business owners on how to both identify potential opportunities for transformative innovation and how to adapt to the constantly changing technologies of today.
Deliver value to our customers by providing the most reliable and efficient products as WHY US.
Our company is professional in selling WHY US as well as providing a series of relevant services.
The risk of curtain rod set is reduced by curtain rods manufacturer with the consumption of .
Wenzhou Pacific Light Industry Co., Ltd. are trained to think about problems and coming up with solutions, as well as presenting the whole idea in a logical and coherent manner.
Custom message
Contact